Equipment & Products
Try-out material analysis has now begun!
2023年9月29日 Equipment & Products
We have started working on the analysis of UHTS materials using the tensile strength machine that has been newly introduced to our plant. Now that it’s not unusual to deal with the 1180MPa materials, we understand the strong necessity to manufacture the dies that ensure the quality of cold press mass production. We will analyze …
Tablet terminals distributed to machining operators
2021年2月4日 Equipment & Products
Starting from this year, we have distributed tablet terminals to each machining operators. The purpose is to reduce the excess use of paper, as well as to reduce unnecessary comings and goings between the factories and the office. Documents such as instructions for machining setups, necessary tool information can now be distributed via tablets. We …
A new CNC machining center (2nd) is installed in Plant 1
2021年2月4日 Equipment & Products
A new CNC machining center, RB-4MⅡ 5 Axis by SNK (SHIN NIPPON KOKI CO., LTD.), is now installed in Plant 1. The same model was installed in June 2020, and this is is the 2nd one.
A new 3D measurement “HEXAGON” is now installed
2020年6月5日 Equipment & Products
We have been using the “VECTRON” for 3D measurement of the panels for a long time, and now it is replaced by a new equipment, “HEXAGON, Absolute Arm 7 Axis (non-contact laser scanner + contact type probe).
A new CNC machining center is installed in Plant 1
2020年6月5日 Equipment & Products
A new CNC machining center, RB-4MⅡ 5Axis by SNK（SHIN NIPPON KOKI CO., LTD.) is now installed in plant 1.
2000t Mechanical press is now installed
2019年12月11日 Equipment & Products
2000t mechanical press, by H&F (Hitachi Zosen Fukui Corporation), is now installed in our new plant (Plant #3).
AGV(Automated Guided Vehicle) is now installed
2019年10月25日 Equipment & Products
We have newly installed the AGV (Automated Guided Vehicle) with its maximum weight 2 ton, in August 2019.
New CNC machining center and EDM are now installed at PT SASAHARA INDONESIA
2019年10月1日 Equipment & Products
Sword SW-423 by Hart Ford, and MV 1200S by MITSUBISHI ELECTRIC are now installed at our plant in Indonesia in Bandung (PT SASAHARA INDONESIA). Also, an improvement work for the plant foundation has been done as below.
Wire Electric Discharge Machine is newly installed
2016年12月20日 Equipment & Products
We have newly installed the Wire Electric Discharge Machine (MV2400S) by MITSUBISHI ELECTRIC. We will strive to strengthen our machining capacity in addition to the exiting two units. For details, please see the Equipment.
5-Axes Control Horizontal Machining Center is newly installed
2016年12月10日 Equipment & Products
We have newly installed the 5-Axes Control Horizontal Machining Center (HU63A-5X) by MITSUI SEIKI. With this, we will further expand our range of processing technologies for practical application of cam machining and hot stamping die production. For details, please see the Equipment.
